LEGO Bowser’s Airship Expansion Set 71391
Compare 0 retailers.
Retailer prices for 71391 are sorted by the latest lowest price.
Retailer pricesPrice history 71391
Full price history at a glance.
We check Dutch retailers every day. This graph shows the full daily-low price series we have for this set.
Daily lowest price tracked across 0 Dutch retailers. The dotted line marks LEGO's recommended retail price.
No price line yet
Once enough measurements are available, daily retailer prices will appear here.
Source: daily measurement at 0 Dutch retailers. RRP via LEGO.com.
Price will likely move slightly.
Calibrated forecast based on historical pricing, seasonal patterns and retailer behavior. Tuned conservatively: rather cautious than optimistic.
Signal is mixed. Small movements are more likely than a big drop.
Projected price path
About this set
71391 by the numbers: price, stock and history.
Kids can build Bowser's iconic Airship to display and enhance their LEGO® Super Mario™ universe with this Expansion Set (71391). The ship can be arranged in 'flying mode' or folded out in 'course mode', and players must overcome challenges such as Bowser's Mecha Hand and a POW Block to pop a Rocky Wrench from its hiding place. (Note: the 71360 or 71387 Starter Course is required for play.) Iconic enemies The set includes Kamek, Rocky Wrench and Goomba figures, plus a Cannon Start Pipe – use it to begin a 90-second level. Children can play solo, team up or compete against a friend with their LEGO® Mario™ or LEGO® Luigi™ figure. And look out for the free LEGO Super Mario app, which has building instructions, creative inspiration and more. Unlimited fun Collectible LEGO Super Mario toy playsets bring family-favourite Super Mario characters into the real world and make ace gifts for trend-setting kids. Children can build and display a brilliant brick-built model of Bowser's Airship and use it to create another unique level in their LEGO® Super Mario™ universe with this cool Expansion Set (71391). Includes LEGO® figures of 3 Super Mario™ characters, Kamek, a Rocky Wrench and a Goomba, plus a POW Block and a Cannon Start Pipe to begin the level and enhance digital-coin-collecting potential. The Airship unfolds to reveal a detailed interior, and there are lots of challenges for players, including using Kamek's broom to knock over Bowser's Mecha Hand and a plank to topple the mast. This 1,152-piece toy playset makes a wonderful birthday or holiday gift for kids aged 8 and up who own a LEGO® Super Mario™ Starter Course (71360 or 71387), which is required for play. Great for solo play or connect via Bluetooth to a friend's LEGO® Mario™ or LEGO® Luigi™ figure (extra figures not included) for 2-player social fun where teamwork earns bonus coins. This Airship measures over 12 in. (30 cm) high, 13.5 in. (35 cm) long and 7.5 in. (19 cm) wide in display form and can be unfolded and combined with other LEGO® Super Mario™ sets in various ways. The free LEGO® Super Mario™ app offers building instructions, inspiration, a safe forum for kids to share ideas and more. For a list of compatible Android and iOS devices, visit LEGO.com/devicecheck. Collectible LEGO® Super Mario™ toy building sets bring Super Mario characters into the real world, offering limitless, fun, creative challenges through expansion, rebuilding and interactive play. LEGO® components meet stringent industry standards to guarantee that they are compatible and connect securely – it’s been that way since 1958. LEGO® building bricks and pieces are dropped, heated, crushed, twisted and analysed to ensure that they meet demanding global safety standards.
All about this set
Background, build experience, collector context, and buying notes in one story.
Kids can build Bowser's iconic Airship to display and enhance their LEGO® Super Mario™ universe with this Expansion Set (71391). The ship can be arranged in 'flying mode' or folded out in 'course mode', and players must overcome challenges such as Bowser's Mecha Hand and a POW Block to pop a Rocky Wrench from its hiding place. (Note: the 71360 or 71387 Starter Course is required for play.) Iconic enemies The set includes Kamek, Rocky Wrench and Goomba figures, plus a Cannon Start Pipe – use it to begin a 90-second level. Children can play solo, team up or compete against a friend with their LEGO® Mario™ or LEGO® Luigi™ figure. And look out for the free LEGO Super Mario app, which has building instructions, creative inspiration and more. Unlimited fun Collectible LEGO Super Mario toy playsets bring family-favourite Super Mario characters into the real world and make ace gifts for trend-setting kids. Children can build and display a brilliant brick-built model of Bowser's Airship and use it to create another unique level in their LEGO® Super Mario™ universe with this cool Expansion Set (71391). Includes LEGO® figures of 3 Super Mario™ characters, Kamek, a Rocky Wrench and a Goomba, plus a POW Block and a Cannon Start Pipe to begin the level and enhance digital-coin-collecting potential. The Airship unfolds to reveal a detailed interior, and there are lots of challenges for players, including using Kamek's broom to knock over Bowser's Mecha Hand and a plank to topple the mast. This 1,152-piece toy playset makes a wonderful birthday or holiday gift for kids aged 8 and up who own a LEGO® Super Mario™ Starter Course (71360 or 71387), which is required for play. Great for solo play or connect via Bluetooth to a friend's LEGO® Mario™ or LEGO® Luigi™ figure (extra figures not included) for 2-player social fun where teamwork earns bonus coins. This Airship measures over 12 in. (30 cm) high, 13.5 in. (35 cm) long and 7.5 in. (19 cm) wide in display form and can be unfolded and combined with other LEGO® Super Mario™ sets in various ways. The free LEGO® Super Mario™ app offers building instructions, inspiration, a safe forum for kids to share ideas and more. For a list of compatible Android and iOS devices, visit LEGO.com/devicecheck. Collectible LEGO® Super Mario™ toy building sets bring Super Mario characters into the real world, offering limitless, fun, creative challenges through expansion, rebuilding and interactive play. LEGO® components meet stringent industry standards to guarantee that they are compatible and connect securely – it’s been that way since 1958. LEGO® building bricks and pieces are dropped, heated, crushed, twisted and analysed to ensure that they meet demanding global safety standards.
When current prices are available, buying context appears here.
Instructions & specifications
Dimensions, pieces, build steps, and the official PDF building instruction.
Parts inventory
Known set data around pieces and build context.
Bricks
Brick 1 x 6
Part ID 3009 · Medium Nougat
Qty 20
Brick 1 x 2
Part ID 3004 · Medium Nougat
Qty 18
Brick 1 x 1
Part ID 3005 · Dark Red
Qty 10
Brick 1 x 1
Part ID 3005 · Trans-Light Blue
Qty 6
Brick 1 x 1
Part ID 3005 · Black
Qty 6
Brick 1 x 4
Part ID 3010 · Medium Nougat
Qty 5
Brick 2 x 4
Part ID 3001 · Medium Nougat
Qty 4
Brick 1 x 1
Part ID 3005 · Dark Orange
Qty 4
Brick 1 x 1
Part ID 3005 · Light Bluish Gray
Qty 4
Brick 1 x 1
Part ID 3005 · Medium Nougat
Qty 4
Brick 1 x 4
Part ID 3010 · Dark Red
Qty 4
Brick 1 x 1 x 3
Part ID 14716 · Light Bluish Gray
Qty 2
Brick 2 x 2 Corner
Part ID 2357 · Light Bluish Gray
Qty 2
Brick 2 x 3
Part ID 3002 · Reddish Brown
Qty 2
Brick 2 x 2
Part ID 3003 · Reddish Brown
Qty 2
Brick 1 x 2
Part ID 3004 · Dark Azure
Qty 2
Brick 1 x 2 with White 'POW' print
Part ID 3004pr0077 · Black
Qty 2
Brick 1 x 1
Part ID 3005 · Sand Green
Qty 2
Brick 1 x 8
Part ID 3008 · Light Bluish Gray
Qty 2
Brick 1 x 6
Part ID 3009 · Dark Orange
Qty 2
Brick 1 x 2 x 2 with Inside Stud Holder
Part ID 3245c · Reddish Brown
Qty 2
Brick 1 x 3
Part ID 3622 · Dark Orange
Qty 2
Brick 1 x 3
Part ID 3622 · Light Bluish Gray
Qty 2
Brick 1 x 3
Part ID 3622 · Dark Bluish Gray
Qty 2
Technic Axles
Technic Axle 2 Notched
Part ID 32062 · Red
Qty 17
Technic Axle 3
Part ID 4519 · Yellow
Qty 5
Technic Axle 4
Part ID 3705 · Black
Qty 2
Technic Axle 6
Part ID 3706 · Black
Qty 2
Technic Axle 6
Part ID 3706 · Red
Qty 2
Technic Axle 4 with Stop
Part ID 87083 · Dark Bluish Gray
Qty 2
Technic Axle 5 with Stop
Part ID 15462 · Reddish Brown
Qty 1
Technic Beams
Technic Beam 1 x 6 Thin
Part ID 32063 · Light Bluish Gray
Qty 16
Technic Beam 1 x 11 Thick
Part ID 32525 · Dark Bluish Gray
Qty 6
Technic Beam 1 x 5 Thick
Part ID 32316 · Black
Qty 4
Technic Beam 1 x 9 Thick
Part ID 40490 · Light Bluish Gray
Qty 3
Technic Beam 1 x 2 Thick
Part ID 43857 · Light Bluish Gray
Qty 2
Technic Beam 3 x 3 T-Shape Thick
Part ID 60484 · Light Bluish Gray
Qty 2
Technic Connectors
Technic Axle Connector Smooth [with x Hole + Orientation]
Part ID 59443 · Reddish Brown
Qty 16
Technic Pin Connector Round [Slotted]
Part ID 62462 · Light Bluish Gray
Qty 4
Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
Part ID 42003 · Light Bluish Gray
Qty 2
Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes]
Part ID 44874 · Black
Qty 2
Technic Pin Connector Round [Slotted]
Part ID 62462 · Tan
Qty 2
Technic Axle and Pin Connector Perpendicular
Part ID 6536 · Black
Qty 2
Plates
Plate 1 x 2
Part ID 3023 · Dark Tan
Qty 14
Plate 1 x 2
Part ID 3023 · Dark Orange
Qty 11
Plate 1 x 1
Part ID 3024 · Light Bluish Gray
Qty 8
Plate 1 x 2
Part ID 3023 · Tan
Qty 7
Plate 1 x 4
Part ID 3710 · Reddish Brown
Qty 7
Plate 2 x 4
Part ID 3020 · Dark Orange
Qty 6
Plate 2 x 6
Part ID 3795 · Reddish Brown
Qty 6
Plate 2 x 3
Part ID 3021 · Dark Tan
Qty 5
Plate 1 x 2
Part ID 3023 · Light Bluish Gray
Qty 5
Plate 2 x 2 Corner
Part ID 2420 · Tan
Qty 4
Plate 2 x 4
Part ID 3020 · Medium Nougat
Qty 4
Plate 1 x 2
Part ID 3023 · Reddish Brown
Qty 4
Plate 1 x 2
Part ID 3023 · Dark Red
Qty 4
Plate 4 x 4
Part ID 3031 · Dark Red
Qty 4
Plate 1 x 3
Part ID 3623 · Light Bluish Gray
Qty 4
Plate 1 x 6
Part ID 3666 · Dark Red
Qty 4
Plate 2 x 6
Part ID 3795 · Medium Nougat
Qty 4
Plate 1 x 10
Part ID 4477 · Dark Tan
Qty 4
Plate 2 x 4
Part ID 3020 · Dark Red
Qty 3
Plate 2 x 6
Part ID 3795 · Sand Green
Qty 3
Plate 1 x 10
Part ID 4477 · Light Bluish Gray
Qty 3
Plate 2 x 2 Corner
Part ID 2420 · Dark Bluish Gray
Qty 2
Plate 2 x 4
Part ID 3020 · Light Bluish Gray
Qty 2
Plate 2 x 3
Part ID 3021 · Dark Azure
Qty 2
Plate 2 x 3
Part ID 3021 · Tan
Qty 2
Plate 2 x 3
Part ID 3021 · Dark Bluish Gray
Qty 2
Plate 2 x 2
Part ID 3022 · Light Bluish Gray
Qty 2
Plate 2 x 2
Part ID 3022 · Reddish Brown
Qty 2
Plate 2 x 2
Part ID 3022 · Dark Tan
Qty 2
Plate 2 x 2
Part ID 3022 · Dark Orange
Qty 2
Plate 1 x 2
Part ID 3023 · Medium Nougat
Qty 2
Plate 1 x 2
Part ID 3023 · Dark Bluish Gray
Qty 2
Plate 1 x 2
Part ID 3023 · Black
Qty 2
Plate 1 x 2
Part ID 3023 · Yellow
Qty 2
Plate 4 x 4
Part ID 3031 · Tan
Qty 2
Plate 2 x 8
Part ID 3034 · Dark Tan
Qty 2
Plate 2 x 8
Part ID 3034 · Medium Nougat
Qty 2
Plate 1 x 8
Part ID 3460 · Dark Bluish Gray
Qty 2
Plate 1 x 3
Part ID 3623 · Dark Bluish Gray
Qty 2
Plate 1 x 6
Part ID 3666 · Tan
Qty 2
Plate 1 x 6
Part ID 3666 · Reddish Brown
Qty 2
Plate 1 x 4
Part ID 3710 · Medium Nougat
Qty 2
Plate 2 x 6
Part ID 3795 · Dark Orange
Qty 2
Plate 2 x 6
Part ID 3795 · Dark Bluish Gray
Qty 2
Plate 1 x 10
Part ID 4477 · Reddish Brown
Qty 2
Plate 2 x 14
Part ID 91988 · Reddish Brown
Qty 2
Bricks Sloped
Slope 30° 1 x 2 x 2/3
Part ID 85984 · Medium Nougat
Qty 11
Slope 65° 2 x 1 x 2
Part ID 60481 · Medium Nougat
Qty 10
Slope 45° 2 x 1 with Bottom Pin
Part ID 3040b · Tan
Qty 6
Slope 18° 4 x 1
Part ID 60477 · Light Bluish Gray
Qty 4
Slope Inverted 45° 3 x 1 Double with 2 Blocked Open Studs
Part ID 18759 · Dark Bluish Gray
Qty 2
Slope 45° 2 x 4
Part ID 3037 · Yellow
Qty 2
Slope 45° 2 x 1 with Bottom Pin
Part ID 3040b · Dark Azure
Qty 2
Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
Part ID 3660 · Tan
Qty 2
Slope Inverted 45° 2 x 1
Part ID 3665 · Tan
Qty 2
Slope Inverted 33° 3 x 2 [Connections between Studs]
Part ID 3747b · Black
Qty 2
Slope Inverted 45° 4 x 2 Double with 2 x 2 Recessed
Part ID 4871 · Tan
Qty 2
Slope 30° 1 x 1 x 2/3 (Cheese Slope)
Part ID 54200 · Light Bluish Gray
Qty 2
Slope 30° 1 x 1 x 2/3 (Cheese Slope)
Part ID 54200 · Dark Red
Qty 2
Slope 65° 2 x 1 x 2
Part ID 60481 · Light Bluish Gray
Qty 2
Plates Special
Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]
Part ID 28802 · Light Bluish Gray
Qty 10
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
Part ID 87580 · Pearl Gold
Qty 9
Bracket 1 x 2 - 2 x 2
Part ID 44728 · Light Bluish Gray
Qty 8
Plate Special 1 x 2 with Clip Horizontal on Side
Part ID 11476 · Dark Red
Qty 6
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
Part ID 15573 · Sand Green
Qty 6
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
Part ID 10247 · Light Bluish Gray
Qty 4
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)
Part ID 18674 · Light Bluish Gray
Qty 4
Plate Special 1 x 2 with Handle on End [Closed Ends]
Part ID 60478 · Dark Bluish Gray
Qty 4
Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)
Part ID 65509 · Dark Orange
Qty 4
Bracket 1 x 2 - 2 x 2 Inverted
Part ID 99207 · Dark Tan
Qty 3
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]
Part ID 15208 · White
Qty 2
Plate Special 1 x 2 [Side Handle Closed Ends]
Part ID 48336 · Reddish Brown
Qty 2
Plate Special 1 x 2 with Clips Horizontal [Open O Clips]
Part ID 60470b · Light Bluish Gray
Qty 2
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
Part ID 61252 · Dark Bluish Gray
Qty 2
Bracket 1 x 2 - 2 x 2 Inverted
Part ID 99207 · Black
Qty 2
Bracket 1 x 2 - 1 x 2
Part ID 99781 · Tan
Qty 2
Bricks Round and Cones
Brick Round 1 x 1 Open Stud
Part ID 3062b · Trans-Light Blue
Qty 10
Brick Round 2 x 2 with Axle Hole
Part ID 3941 · Dark Bluish Gray
Qty 6
Brick Round 3 x 3 x 2 Recessed Center with 2 x 2 Studs and Axle Hole
Part ID 73111 · Yellow
Qty 6
Brick Round 2 x 2 Dome Top, Hollow Stud
Part ID 30367c · Pearl Gold
Qty 4
Cone 1 x 1 [Top Groove]
Part ID 59900 · Dark Bluish Gray
Qty 3
Cone Half 2 x 4 x 3
Part ID 38317 · Dark Bluish Gray
Qty 2
Brick Round 2 x 2 with Axle Hole
Part ID 3941 · Reddish Brown
Qty 2
Brick Round 2 x 2 with Axle Hole
Part ID 3941 · Black
Qty 2
Cone 4 x 4 x 2, Axle Hole [Plain]
Part ID 3943b · Dark Bluish Gray
Qty 2
Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs
Part ID 48092 · Tan
Qty 2
Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs
Part ID 48092 · Dark Orange
Qty 2
Cone 1 x 1 [Top Groove]
Part ID 59900 · Light Bluish Gray
Qty 2
Brick Round 2 x 2 Truncated Cone
Part ID 98100 · Light Bluish Gray
Qty 2
Minifig Accessories
Technic Pins
Technic Axle Pin with Friction Ridges Lengthwise
Part ID 43093 · Blue
Qty 10
Technic Pin without Friction Ridges Lengthwise
Part ID 3673 · Light Bluish Gray
Qty 4
Technic Pin with Friction Ridges Lengthwise with No Center Slots
Part ID 61332 · Black
Qty 3
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle
Part ID 18651 · Black
Qty 2
Technic Pin 1/2
Part ID 4274 · Light Bluish Gray
Qty 2
Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot
Part ID 42924 · Blue
Qty 2
Technic Axle Pin 3L without Friction Ridges and 2L Axle
Part ID 65249 · White
Qty 2
Tiles Round and Curved
Tile Round 1 x 1 Quarter
Part ID 25269 · Light Bluish Gray
Qty 8
Tile 2 x 2 Curved, Macaroni
Part ID 27925 · Light Bluish Gray
Qty 8
Tile Round 2 x 2 with Red Bowser Skull print
Part ID 14769pr1220 · Black
Qty 7
Tile Round 2 x 2 with Bottom Stud Holder
Part ID 14769 · Black
Qty 6
Tile Round 1 x 1
Part ID 98138 · Light Bluish Gray
Qty 6
Tile Round 2 x 2 with Bottom Stud Holder
Part ID 14769 · Yellow
Qty 2
Tile Round 2 x 2 with Bottom Stud Holder
Part ID 14769 · Dark Bluish Gray
Qty 2
Tile 4 x 4 Curved, Macaroni
Part ID 27507 · Dark Bluish Gray
Qty 2
Tile 4 x 4 Curved, Macaroni
Part ID 27507 · Reddish Brown
Qty 2
Tile Round 2 x 4
Part ID 66857 · Black
Qty 2
Tile Round 2 x 2 with Bottom Stud Holder
Part ID 14769 · Tan
Qty 1
Bricks Curved
Brick Curved 1 x 2 x 1 1/3 with Curved Top
Part ID 6091 · Tan
Qty 8
Brick Curved 1 x 2 x 1 1/3 with Curved Top
Part ID 6091 · Light Bluish Gray
Qty 6
Slope Curved 4 x 1 Double with No Studs
Part ID 93273 · Tan
Qty 5
Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports]
Part ID 14395 · Reddish Brown
Qty 4
Brick Curved 1 x 2 x 1 1/3 with Curved Top
Part ID 6091 · Yellow
Qty 4
Brick Curved, 3 x 1 with 1/3 Inverted Cutout
Part ID 70681 · Tan
Qty 4
Brick Curved, 3 x 1 with 1/3 Inverted Cutout
Part ID 70681 · Light Bluish Gray
Qty 4
Brick Arch 1 x 3 x 2
Part ID 88292 · Medium Nougat
Qty 4
Slope Curved 2 x 1 with Stud Notch Right
Part ID 29119 · Tan
Qty 3
Slope Curved 2 x 1 with Stud Notch Left
Part ID 29120 · Tan
Qty 3
Brick Arch 1 x 4
Part ID 3659 · Black
Qty 3
Slope Curved 2 x 1 No Studs [1/2 Bow]
Part ID 11477 · Light Bluish Gray
Qty 2
Brick Arch 1 x 3 x 3 [Gothic]
Part ID 13965 · Reddish Brown
Qty 2
Brick Arch 1 x 3 x 3 [Gothic]
Part ID 13965 · Light Bluish Gray
Qty 2
Slope Curved 2 x 2 x 2/3
Part ID 15068 · Black
Qty 2
Slope Curved 2 x 2 x 2/3
Part ID 15068 · Dark Orange
Qty 2
Slope Curved 2 x 2 x 2/3
Part ID 15068 · Medium Nougat
Qty 2
Brick Arch 1 x 3 x 2 Inverted [Inside Bow]
Part ID 18653 · Light Bluish Gray
Qty 2
Slope Curved 2 x 2 x 2/3 Inverted
Part ID 32803 · White
Qty 2
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End
Part ID 47457 · White
Qty 2
Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs
Part ID 49307 · Tan
Qty 2
Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs
Part ID 49307 · Light Bluish Gray
Qty 2
Slope Curved 3 x 1 No Studs
Part ID 50950 · Dark Red
Qty 2
Brick Arch 1 x 3 x 2
Part ID 88292 · Tan
Qty 2
Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Part ID 11153 · Reddish Brown
Qty 1
Slope Curved 2 x 2 x 2/3
Part ID 15068 · Tan
Qty 1
Technic Bricks
Technic Brick 1 x 6 [5 Pin Holes]
Part ID 3894 · Light Bluish Gray
Qty 7
Technic Brick 1 x 4 [3 Pin Holes]
Part ID 3701 · Black
Qty 6
Technic Brick 1 x 14 [13 Pin Holes]
Part ID 32018 · Dark Bluish Gray
Qty 5
Technic Brick 1 x 8 [7 Pin Holes]
Part ID 3702 · Black
Qty 4
Technic Brick 1 x 1 with Pin Hole
Part ID 6541 · Light Bluish Gray
Qty 4
Technic Brick 1 x 1 with Axle Hole
Part ID 73230 · Black
Qty 4
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
Part ID 32064a · Black
Qty 2
Technic Brick 1 x 2 [1 Pin Hole]
Part ID 3700 · Yellow
Qty 2
Technic Brick 1 x 2 [1 Pin Hole]
Part ID 3700 · Reddish Brown
Qty 2
Technic Brick 1 x 4 [3 Pin Holes]
Part ID 3701 · Reddish Brown
Qty 2
Technic Brick 1 x 1 with Pin Hole
Part ID 6541 · Dark Azure
Qty 2
Tiles Special
Tile Round 2 x 2 with Hole
Part ID 15535 · Light Bluish Gray
Qty 6
Tile Special 1 x 2 with Two Vertical Teeth / Tooth
Part ID 15209 · White
Qty 4
Tile Special 1 x 1 with Clip with Rounded Edges
Part ID 15712 · Light Bluish Gray
Qty 4
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]
Part ID 99563 · Tan
Qty 4
Tile Special 2 x 2 Inverted with Kamek and Barcode Print (Sticker)
Part ID 11203pr0132 · White
Qty 1
Hinges, Arms and Turntables
Hinge Plate 1 x 4 Locking Dual 1 Finger
Part ID 44568 · Light Bluish Gray
Qty 6
Plates Round Curved and Dishes
Plate Round 1 x 1 with Solid Stud
Part ID 6141 · Dark Red
Qty 6
Plate Round Half 3 x 6 with 1 x 2 Cutout
Part ID 18646 · Black
Qty 4
Plate Round 4 x 4 with Pin Hole
Part ID 60474 · Light Bluish Gray
Qty 4
Plate Round Corners Double 4 x 8 with 2 x 2 Cutout and 2 x 8 Raised Studs, Reduces Nubs
Part ID 73832 · Medium Nougat
Qty 4
Plate Round Half 4 x 8
Part ID 22888 · Dark Tan
Qty 2
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Part ID 4032a · Light Bluish Gray
Qty 2
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Part ID 4032a · Tan
Qty 2
Plate Round Corners 8 x 8 x 2/3 Circle with Reduced Knobs
Part ID 66790 · Medium Nougat
Qty 2
Tiles
Tile 2 x 4 with Groove
Part ID 87079 · Dark Bluish Gray
Qty 6
Tile 1 x 4 with Groove
Part ID 2431 · Reddish Brown
Qty 5
Tile 1 x 2 with Groove
Part ID 3069b · Light Bluish Gray
Qty 5
Tile 1 x 6 with Groove
Part ID 6636 · Medium Nougat
Qty 5
Tile 1 x 2 with Groove
Part ID 3069b · Dark Orange
Qty 3
Tile 1 x 4 with Groove
Part ID 2431 · Tan
Qty 2
Tile 2 x 3
Part ID 26603 · Light Bluish Gray
Qty 2
Tile 1 x 2 with Groove
Part ID 3069b · Black
Qty 2
Tile 1 x 2 with Groove
Part ID 3069b · Dark Bluish Gray
Qty 2
Tile 1 x 2 with Groove
Part ID 3069b · Sand Green
Qty 2
Tile 1 x 8 with Groove
Part ID 4162 · Light Bluish Gray
Qty 2
Tile 2 x 4 with Groove
Part ID 87079 · Dark Red
Qty 2
Bricks Special
Brick Special 1 x 1 with Stud on 1 Side
Part ID 87087 · Sand Green
Qty 6
Brick Special 1 x 2 Palisade [aka Log]
Part ID 30136 · Reddish Brown
Qty 4
Brick Special 1 x 2 Palisade [aka Log]
Part ID 30136 · Dark Bluish Gray
Qty 4
Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side
Part ID 32952 · Reddish Brown
Qty 4
Brick Special 1 x 1 with Clip Horizontal
Part ID 60476 · White
Qty 4
Brick Special 1 x 1 with Stud on 1 Side
Part ID 87087 · Light Bluish Gray
Qty 4
Brick Special 2 x 2 with 2 Pins and Axle Hole
Part ID 30000 · Dark Bluish Gray
Qty 3
Brick Special 1 x 2 with 2 Studs on 1 Side
Part ID 11211 · Tan
Qty 2
Brick Special 1 x 2 Palisade [aka Log]
Part ID 30136 · Medium Nougat
Qty 2
Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides
Part ID 67329 · Dark Bluish Gray
Qty 2
Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder
Part ID 73562 · Black
Qty 2
Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder
Part ID 73562 · Dark Bluish Gray
Qty 2
Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder
Part ID 76766 · Black
Qty 2
Brick Special 1 x 1 with Stud on 1 Side
Part ID 87087 · Yellow
Qty 2
Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom
Part ID 11215 · Black
Qty 1
Panels
Panel 1 x 2 x 2 [Side Supports / Hollow Studs]
Part ID 87552 · Dark Red
Qty 6
Panel 1 x 2 x 1 [Rounded Corners]
Part ID 4865b · Light Bluish Gray
Qty 3
Panel 1 x 2 x 2 [Side Supports / Hollow Studs]
Part ID 87552 · Trans-Clear
Qty 2
Plates Angled
Wedge Plate 4 x 2 Right
Part ID 41769 · Light Bluish Gray
Qty 4
Wedge Plate 4 x 2 Left
Part ID 41770 · Light Bluish Gray
Qty 4
Wedge Plate 6 x 6 Cut Corner
Part ID 6106 · Medium Nougat
Qty 2
Bars, Ladders and Fences
Curled Decorative Ornament with Bar
Part ID 28870 · Light Bluish Gray
Qty 2
Fence Spindled 1 x 4 x 2 [4 Top Studs]
Part ID 15332 · Light Bluish Gray
Qty 1
Technic Bushes
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
Part ID 32123b · Yellow
Qty 2
Technic Special
Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole
Part ID 32124 · Dark Bluish Gray
Qty 2
Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole
Part ID 32124 · Reddish Brown
Qty 2
Transportation - Sea and Air
Containers
Barrel Half Large with Axle Hole
Part ID 64951 · Medium Nougat
Qty 2
Minifig Upper Body
Arm, Long, with Technic Pin
Part ID 66788 · Yellow
Qty 2
Retailer reviews
Summarized retailer review data when available.
All retailer prices
Current prices, stock and discounts per retailer.
Price context
Lowest, highest and average price for this set.
This context is based on 0 price points across 0 retailers. The chart on the page remains the full interactive source.
Price forecast
Conservative baseline for the next period.
The signal is mixed. Small movements are more likely than a large drop.
FAQ & set details
Pieces, year, RRP and retailer coverage.
What is the lowest price for Bowser’s Airship Expansion Set?
Has LEGO 71391 ever been cheaper?
How many pieces does LEGO 71391 have?
What year is this set from?
What is the RRP for LEGO 71391?
What is the recommended age for LEGO 71391?
Is LEGO 71391 still available?
Which retailers do you compare?
How often do you update prices?
Frequently asked questions
Quick answers about price, stock and set data.