Balrog comes to life !
Excellent kit! Fun time building and lighting it! I can see a great deal of time went into designing it. App not working so I can register my points.
Retailer prices for 10367 are sorted by the latest lowest price.
Retailer pricesPrice history 10367
We check Dutch retailers every day. This graph shows the full daily-low price series we have for this set.
Daily lowest price tracked across 41 Dutch retailers. The dotted line marks LEGO's recommended retail price.
Source: daily measurement at 41 Dutch retailers, 14 Dec 2025 – 31 May 2026. RRP via LEGO.com.
| Date | Price | Retailer | Stock |
|---|---|---|---|
| €94,99 | MediaMarkt | In stock | |
| €109,99 | Supra Bazar | In stock | |
| €99,95 | Blokkenpiloot | In stock | |
| €99,95 | De Kinderplaneet | In stock | |
| €119,99 | Toyhouse | In stock | |
| €104,95 | SpeelGoedNL | In stock | |
| €89,90 | Speelgoed en Modelbouw | In stock | |
| €95,99 | BRICKshop | In stock | |
| €104,99 | Conrad | In stock | |
| €95,90 | Alternate | In stock | |
| €92,68 | Joybuy | In stock | |
| €99,99 | Playtoday | In stock |
Calibrated forecast based on historical pricing, seasonal patterns and retailer behavior. Tuned conservatively: rather cautious than optimistic.
Signal is mixed. Small movements are more likely than a big drop.
What to know about LEGO 10367 before you buy.
For LEGO The Lord of the Rings: Balrog™ Book Nook (10367), we track 18 retailers in the Netherlands, with 18 currently in stock. The current lowest price is €89,90. Use price history and stock data to judge whether this is a good time to buy.
Create a window into Middle-earth™ with the LEGO® Icons The Lord of the Rings: Balrog™ Book Nook (10367) bookshelf decor kit – a fun gift idea for book lovers and fans of the legendary film trilogy. Slide the book nook between your favourite novels for a glimpse into J.R.R. Tolkien’s fantasy world or open it to reveal a striking display depicting Gandalf’s epic showdown with the Balrog on the Bridge of Khazad-dûm. Bearing a plaque with the words ‘You Shall Not Pass’, the model depicts Gandalf the Grey™ in a fearless stance and the Balrog with its mighty wings unfurled against a blazing wall of flames. Both characters are detachable and the Gandalf minifigure has a staff and sword, while the Balrog figure wields a fiery whip and features posable limbs and wings for dynamic display. Discover the inspiring range of LEGO building sets for adults. The LEGO Builder app features a 3D digital version of the building instructions included with this set for an immersive interactive experience.
All about this set
Background, build experience, collector context, and buying notes in one story.
For LEGO The Lord of the Rings: Balrog™ Book Nook (10367), we track 18 retailers in the Netherlands, with 18 currently in stock. The current lowest price is €89,90. Use price history and stock data to judge whether this is a good time to buy.
Create a window into Middle-earth™ with the LEGO® Icons The Lord of the Rings: Balrog™ Book Nook (10367) bookshelf decor kit – a fun gift idea for book lovers and fans of the legendary film trilogy. Slide the book nook between your favourite novels for a glimpse into J.R.R. Tolkien’s fantasy world or open it to reveal a striking display depicting Gandalf’s epic showdown with the Balrog on the Bridge of Khazad-dûm. Bearing a plaque with the words ‘You Shall Not Pass’, the model depicts Gandalf the Grey™ in a fearless stance and the Balrog with its mighty wings unfurled against a blazing wall of flames. Both characters are detachable and the Gandalf minifigure has a staff and sword, while the Balrog figure wields a fiery whip and features posable limbs and wings for dynamic display. Discover the inspiring range of LEGO building sets for adults. The LEGO Builder app features a 3D digital version of the building instructions included with this set for an immersive interactive experience.
The current lowest price is €89,90 across 18 tracked retailers.
Instructions & specifications
Dimensions, pieces, build steps, and the official PDF building instruction.
Parts inventory
Known set data around pieces and build context.
Plates
Plate 1 x 2
Part ID 3023 · Trans-Orange
Qty 42
Plate 1 x 2
Part ID 3023 · Dark Bluish Gray
Qty 24
Plate 1 x 4
Part ID 3710 · Dark Bluish Gray
Qty 13
Plate 2 x 2 Corner
Part ID 2420 · Dark Bluish Gray
Qty 12
Plate 2 x 3
Part ID 3021 · Dark Bluish Gray
Qty 12
Plate 1 x 2
Part ID 3023 · Dark Orange
Qty 10
Plate 1 x 1
Part ID 3024 · Trans-Orange
Qty 8
Plate 1 x 3
Part ID 3623 · Dark Bluish Gray
Qty 8
Plate 1 x 6
Part ID 3666 · Dark Bluish Gray
Qty 8
Plate 1 x 5
Part ID 78329 · Dark Bluish Gray
Qty 8
Plate 2 x 3
Part ID 3021 · Black
Qty 6
Plate 2 x 2
Part ID 3022 · Light Bluish Gray
Qty 6
Plate 2 x 3
Part ID 3021 · Medium Nougat
Qty 4
Plate 2 x 2
Part ID 3022 · Dark Bluish Gray
Qty 4
Plate 1 x 2
Part ID 3023 · Dark Tan
Qty 4
Plate 1 x 1
Part ID 3024 · Medium Nougat
Qty 4
Plate 1 x 3
Part ID 3623 · Black
Qty 4
Plate 2 x 6
Part ID 3795 · Medium Nougat
Qty 4
Plate 2 x 2
Part ID 3022 · Yellow
Qty 3
Plate 1 x 1
Part ID 3024 · Dark Bluish Gray
Qty 3
Plate 1 x 4
Part ID 3710 · Black
Qty 3
Plate 1 x 12
Part ID 60479 · Dark Bluish Gray
Qty 3
Plate 2 x 2 Corner
Part ID 2420 · Black
Qty 2
Plate 2 x 4
Part ID 3020 · Medium Nougat
Qty 2
Plate 2 x 3
Part ID 3021 · Dark Tan
Qty 2
Plate 2 x 2
Part ID 3022 · Tan
Qty 2
Plate 1 x 1
Part ID 3024 · Dark Tan
Qty 2
Plate 1 x 3
Part ID 3623 · Dark Tan
Qty 2
Plate 1 x 4
Part ID 3710 · Dark Orange
Qty 2
Plate 1 x 4
Part ID 3710 · Dark Tan
Qty 2
Plate 2 x 6
Part ID 3795 · Black
Qty 2
Plate 2 x 6
Part ID 3795 · Dark Bluish Gray
Qty 2
Plate 2 x 16
Part ID 4282 · Black
Qty 2
Plate 2 x 14
Part ID 91988 · Dark Bluish Gray
Qty 2
Bricks Special
Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides
Part ID 67329 · Dark Bluish Gray
Qty 42
Brick Special 1 x 4 with 4 Studs on One Side
Part ID 30414 · Dark Bluish Gray
Qty 12
Brick Special 1 x 1 with Studs on 2 Adjacent Sides
Part ID 26604 · Dark Bluish Gray
Qty 10
Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder
Part ID 86876 · Dark Bluish Gray
Qty 6
Brick Special 1 x 2 with 2 Studs on 1 Side
Part ID 11211 · Tan
Qty 4
Brick Special 1 x 2 with Vertical Closed Handle on Edge
Part ID 34816 · Black
Qty 4
Brick Special 1 x 2 with 2 Studs on 1 Side
Part ID 11211 · Red
Qty 2
Brick Special 1 x 2 Palisade [aka Log]
Part ID 30136 · Light Bluish Gray
Qty 2
Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder
Part ID 73562 · Dark Bluish Gray
Qty 2
Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder
Part ID 86876 · Light Bluish Gray
Qty 2
Brick Special 1 x 1 with Stud on 1 Side
Part ID 87087 · Light Bluish Gray
Qty 2
Brick Special 1 x 1 with Stud on 1 Side
Part ID 87087 · Orange
Qty 2
Brick Special 2 x 2 with Grooves and Axle Hole
Part ID 90258 · Dark Bluish Gray
Qty 2
Plates Special
Plate Special 1 x 1 with Tooth
Part ID 49668 · Trans-Orange
Qty 22
Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]
Part ID 28802 · Dark Bluish Gray
Qty 8
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
Part ID 60897 · Orange
Qty 8
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version
Part ID 4304 · Black
Qty 7
Plate Special 1 x 2 5.9mm Centre Side Towball Socket
Part ID 14704 · Light Bluish Gray
Qty 6
Plate Special 1 x 2 [Open O Top Clip]
Part ID 44861 · Black
Qty 6
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
Part ID 60897 · Black
Qty 6
Bracket 1 x 2 - 1 x 2 Inverted
Part ID 99780 · Black
Qty 6
Plate Special 1 x 2 with Handles on Ends
Part ID 18649 · Reddish Orange
Qty 4
Plate 1 x 1 x 2/3 Half Round with Side Stud
Part ID 3386 · Black
Qty 4
Bracket 1 x 1 - 1 x 1 Inverted
Part ID 36840 · Dark Bluish Gray
Qty 4
Bracket 1 x 1 - 1 x 1
Part ID 36841 · Light Bluish Gray
Qty 4
Plate Special 1 x 4 with 2 Studs with Groove [New Underside]
Part ID 41740 · Medium Nougat
Qty 4
Plate Special 1 x 2 with Handle on End [Closed Ends]
Part ID 60478 · Black
Qty 4
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
Part ID 61252 · Black
Qty 4
Bracket 1 x 1 - 1 x 2 Inverted
Part ID 73825 · Dark Orange
Qty 4
Bracket 1 x 1 - 1 x 2
Part ID 79389 · Dark Bluish Gray
Qty 4
Bracket 1 x 2 - 2 x 2 Inverted
Part ID 99207 · Black
Qty 4
Plate Special 2 x 2 with Only 2 studs
Part ID 33909 · Dark Bluish Gray
Qty 3
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
Part ID 15573 · Medium Nougat
Qty 2
Plate Special 1 x 1 Rounded with Handle
Part ID 26047 · Black
Qty 2
Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]
Part ID 28802 · Black
Qty 2
Plate Special 3 x 2 with Rounded End, Hole
Part ID 3176 · Black
Qty 2
Plate Special 1 x 2 with Door Rail
Part ID 32028 · Black
Qty 2
Plate Special 2 x 2 with Only 2 studs
Part ID 33909 · Black
Qty 2
Plate Special 2 x 2 with Only 2 studs
Part ID 33909 · Dark Tan
Qty 2
Bracket 1 x 1 - 1 x 1 Inverted
Part ID 36840 · Black
Qty 2
Bracket 1 x 1 - 1 x 1
Part ID 36841 · Black
Qty 2
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised - Updated Version
Part ID 4304 · Dark Bluish Gray
Qty 2
Bracket 1 x 2 - 2 x 2
Part ID 44728 · Red
Qty 2
Plate Special 1 x 2 [Side Handle Closed Ends]
Part ID 48336 · Dark Bluish Gray
Qty 2
Plate Special 1 x 1 with Tooth
Part ID 49668 · Dark Tan
Qty 2
Plate Special 1 x 2 with Clip Horizontal on End
Part ID 63868 · Dark Bluish Gray
Qty 2
Plate Special 1 x 2 with Angled Handles on Side
Part ID 92692 · Black
Qty 2
Plate Special 1 x 2 with 5.9mm Centre Side Towball
Part ID 14417 · Dark Bluish Gray
Qty 1
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]
Part ID 15208 · Dark Tan
Qty 1
Plate Special 1 x 2 Side Handle [Free Ends]
Part ID 2540 · Black
Qty 1
Plates Round Curved and Dishes
Plate Special 1 x 2 Rounded with 2 Open Studs
Part ID 35480 · Black
Qty 19
Plate Round 1 x 1 with Solid Stud
Part ID 6141 · Light Bluish Gray
Qty 9
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
Part ID 2654 · Black
Qty 6
Plate Special 1 x 2 Rounded with 2 Open Studs
Part ID 35480 · Light Bluish Gray
Qty 4
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Part ID 4032a · Light Bluish Gray
Qty 4
Plate Round 1 x 1 with Solid Stud
Part ID 6141 · Tan
Qty 2
Tiles Round and Curved
Tile 4 x 4 Curved, Macaroni
Part ID 27507 · Trans-Orange
Qty 18
Tile Round 1 x 1 Quarter
Part ID 25269 · Black
Qty 4
Tile Round 1 x 1 Half Circle
Part ID 24246 · Trans-Orange
Qty 3
Tile Round 2 x 2 with Bottom Stud Holder
Part ID 14769 · Black
Qty 2
Tile Round 2 x 2 Half Circle
Part ID 5520 · Medium Nougat
Qty 2
Tile Round 1 x 1
Part ID 98138 · Black
Qty 2
Technic Axles
Technic Axle 2 Notched
Part ID 32062 · Red
Qty 17
Technic Axle 3
Part ID 4519 · Yellow
Qty 4
Technic Axle 3 with Stop
Part ID 24316 · Reddish Brown
Qty 2
Tiles Special
Tile Special 2 x 3 Pentagonal
Part ID 22385 · Dark Bluish Gray
Qty 16
Tile Special 2 x 2 Corner with Cut Corner - Facet
Part ID 27263 · Black
Qty 10
Tile Special 2 x 3 Pentagonal
Part ID 22385 · Medium Nougat
Qty 8
Tile Special 2 x 3 Pentagonal
Part ID 22385 · Dark Tan
Qty 8
Tile 45° Cut 2 x 2 (Triangle)
Part ID 35787 · Dark Bluish Gray
Qty 4
Tile 1 x 2 with Stud Notch Left
Part ID 5091 · Dark Orange
Qty 4
Tile 1 x 2 with Stud Notch Right
Part ID 5092 · Dark Orange
Qty 4
Tile 1 x 2 with Stud Notch Left
Part ID 5091 · Dark Bluish Gray
Qty 3
Tile 1 x 2 with Stud Notch Left
Part ID 5091 · Black
Qty 3
Tile 1 x 2 with Stud Notch Right
Part ID 5092 · Black
Qty 3
Tile Special 2 x 3 Pentagonal
Part ID 22385 · Black
Qty 2
Tile Special 1 x 2 Grille with Bottom Groove
Part ID 2412b · Black
Qty 2
Tile Special 2 x 2 Corner with Cut Corner - Facet
Part ID 27263 · Dark Orange
Qty 2
Tile 1 x 2 with Stud Notch Left
Part ID 5091 · Light Bluish Gray
Qty 2
Tile 1 x 2 with Stud Notch Right
Part ID 5092 · Light Bluish Gray
Qty 2
Tiles
Tile 2 x 6
Part ID 69729 · Dark Bluish Gray
Qty 14
Tile 1 x 2 with Groove
Part ID 3069b · Black
Qty 13
Tile 1 x 2 with Groove
Part ID 3069b · Dark Bluish Gray
Qty 8
Tile 1 x 8 with Groove
Part ID 4162 · Black
Qty 8
Tile 1 x 8 with Groove
Part ID 4162 · Dark Bluish Gray
Qty 8
Tile 1 x 3
Part ID 63864 · Dark Bluish Gray
Qty 8
Tile 2 x 2 Corner
Part ID 14719 · Black
Qty 6
Tile 2 x 3
Part ID 26603 · Black
Qty 6
Tile 1 x 1 with Groove
Part ID 3070b · Dark Orange
Qty 6
Tile 1 x 6 with Groove
Part ID 6636 · Dark Bluish Gray
Qty 6
Tile 2 x 4 with Groove
Part ID 87079 · Dark Bluish Gray
Qty 6
Tile 2 x 4 with Groove
Part ID 87079 · Black
Qty 6
Tile 1 x 2 with Groove
Part ID 3069b · Dark Orange
Qty 5
Tile 2 x 3
Part ID 26603 · Dark Bluish Gray
Qty 4
Tile 2 x 2 with Groove
Part ID 3068b · Black
Qty 4
Tile 1 x 2 with Groove
Part ID 3069b · Medium Nougat
Qty 4
Tile 1 x 1 with Groove
Part ID 3070b · Dark Bluish Gray
Qty 4
Tile 1 x 1 with Groove
Part ID 3070b · Black
Qty 4
Tile 1 x 8 with Groove
Part ID 4162 · Dark Tan
Qty 4
Tile 1 x 3
Part ID 63864 · Black
Qty 4
Tile 1 x 6 with Groove
Part ID 6636 · Dark Orange
Qty 4
Tile 2 x 6
Part ID 69729 · Medium Nougat
Qty 4
Tile 2 x 6
Part ID 69729 · Black
Qty 3
Tile 2 x 4 with Groove
Part ID 87079 · Dark Orange
Qty 3
Tile 1 x 4 with Groove
Part ID 2431 · Dark Bluish Gray
Qty 2
Tile 1 x 4 with Groove
Part ID 2431 · Dark Orange
Qty 2
Tile 2 x 2 with Groove
Part ID 3068b · Medium Nougat
Qty 2
Tile 1 x 2 with Groove
Part ID 3069b · Dark Tan
Qty 2
Tile 1 x 8 with Groove
Part ID 4162 · Light Bluish Gray
Qty 2
Tile 1 x 3
Part ID 63864 · Medium Nougat
Qty 2
Tile 2 x 6
Part ID 69729 · Dark Orange
Qty 2
Tile 2 x 4 with Groove
Part ID 87079 · Dark Tan
Qty 2
Bricks Sloped
Slope 45° 2 x 1 with 2/3 Cutout [New Version]
Part ID 15672 · Dark Orange
Qty 12
Slope 30° 1 x 1 x 2/3 (Cheese Slope)
Part ID 54200 · Dark Bluish Gray
Qty 12
Slope 45° 2 x 1 with 2/3 Cutout [New Version]
Part ID 15672 · Dark Bluish Gray
Qty 8
Slope 45° 2 x 1 with 2/3 Cutout [New Version]
Part ID 15672 · Dark Tan
Qty 8
Slope 30° 1 x 1 x 2/3 (Cheese Slope)
Part ID 54200 · Dark Orange
Qty 8
Slope 30° 1 x 2 x 2/3
Part ID 85984 · Dark Bluish Gray
Qty 6
Slope 45° 2 x 1 Inverted with 2/3 Cutout
Part ID 2310 · Dark Bluish Gray
Qty 4
Slope 45° 2 x 1 Inverted with 2/3 Cutout
Part ID 2310 · Light Bluish Gray
Qty 4
Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud
Part ID 28192 · Dark Bluish Gray
Qty 4
Slope 45° 2 x 1 with Bottom Pin
Part ID 3040b · Dark Bluish Gray
Qty 4
Slope Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection
Part ID 4287c · Dark Bluish Gray
Qty 4
Slope 18° 2 x 1 x 2/3
Part ID 5404 · Dark Bluish Gray
Qty 4
Slope 30° 1 x 1 x 2/3 (Cheese Slope)
Part ID 54200 · Trans-Orange
Qty 4
Slope 45° 2 x 1 with 2/3 Cutout [New Version]
Part ID 15672 · Black
Qty 2
Slope Inverted 45° 3 x 1 Double with 2 Blocked Open Studs
Part ID 18759 · Dark Bluish Gray
Qty 2
Slope 45° 2 x 1 with Bottom Pin
Part ID 3040b · Dark Orange
Qty 2
Slope 45° 2 x 2 Double
Part ID 3043 · Black
Qty 2
Slope Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
Part ID 3660 · Dark Bluish Gray
Qty 2
Slope 30° 1 x 2 x 2/3
Part ID 85984 · Black
Qty 2
Slope 30° 1 x 2 x 2/3
Part ID 85984 · Medium Nougat
Qty 2
Slope 30° 1 x 2 x 2/3
Part ID 85984 · Dark Tan
Qty 2
Technic Connectors
Technic Axle Connector Smooth [with x Hole + Orientation]
Part ID 59443 · Black
Qty 12
Technic Pin Connector Hub with 2 Perpendicular Axles
Part ID 10197 · Black
Qty 4
Technic Pin Connector Round 1L [Beam]
Part ID 18654 · Black
Qty 4
Technic Pin Connector Hub with 1 Axle
Part ID 22961 · Black
Qty 4
Technic Pin Connector Hub with 2 Axles
Part ID 27940 · Black
Qty 4
Technic Axle and Pin Connector Angled #5 - 112.5°
Part ID 32015 · Black
Qty 4
Technic Axle and Pin Connector Triple [120° Offset]
Part ID 10288 · Black
Qty 2
Technic Pin Connector Hub with 1 Axle
Part ID 22961 · Light Bluish Gray
Qty 2
Technic Axle and Pin Connector Angled #1
Part ID 32013 · Dark Bluish Gray
Qty 2
Technic Axle and Pin Connector Angled #3 - 157.5°
Part ID 32016 · Black
Qty 2
Technic Axle and Pin Connector Angled #4 - 135°
Part ID 32192 · Black
Qty 2
Technic Pin Connector Hub with 3L Axle
Part ID 5713 · Light Bluish Gray
Qty 2
Technic Axle and Pin Connector Perpendicular
Part ID 6536 · Black
Qty 2
Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Square Holes]
Part ID 65487 · Black
Qty 2
Technic Axle Connector 2 x 3 with Ball Socket, Closed Sides
Part ID 67695 · Black
Qty 2
Animal / Creature Body Parts
Animal / Creature Body Part, Claw with Clip
Part ID 3171 · Black
Qty 10
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
Part ID 53451 · Black
Qty 5
Black Wing, Dragon with Dark Bluish Grey Webbing
Part ID 10108119a · [No Color/Any Color]
Qty 2
Animal Body Part, Horn Stacked 45 deg. with Axle Connectors
Part ID 2142 · Black
Qty 2
Animal Body Part, Horn (Cattle)
Part ID 64847 · Dark Tan
Qty 2
Bricks Round and Cones
Brick Round 2 x 2 with Axle Hole
Part ID 3941 · Light Bluish Gray
Qty 10
Cone 1 x 1 [Top Groove]
Part ID 59900 · Black
Qty 6
Technic Beams
Technic Beam 1 x 2 Thin
Part ID 41677 · Black
Qty 10
Technic Beam 1 x 3 Thin
Part ID 6632 · Black
Qty 2
Technic Pins
Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole
Part ID 66906 · Black
Qty 10
Technic Pin 1/2 with Friction
Part ID 89678 · Dark Bluish Gray
Qty 7
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle
Part ID 11214 · Dark Bluish Gray
Qty 4
Technic Axle Towball
Part ID 2736 · Light Bluish Gray
Qty 3
Technic Axle Pin without Friction Ridges Lengthwise
Part ID 3749 · Tan
Qty 2
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
Part ID 47455 · Black
Qty 2
Technic Pin with Friction Ridges Lengthwise with No Center Slots
Part ID 61332 · Black
Qty 2
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]
Part ID 65304 · Orange
Qty 2
Bricks Curved
Slope Curved 2 x 2 x 2/3
Part ID 15068 · Black
Qty 8
Slope Curved 2 x 1 No Studs [1/2 Bow]
Part ID 11477 · Black
Qty 5
Slope Curved 2 x 1 with Stud Notch Right
Part ID 29119 · Black
Qty 5
Slope Curved 2 x 1 with Stud Notch Left
Part ID 29120 · Black
Qty 5
Slope Curved 2 x 2 with Lip, No Studs
Part ID 30602 · Black
Qty 5
Slope Curved 2 x 1 No Studs [1/2 Bow]
Part ID 11477 · Reddish Orange
Qty 4
Slope Curved 4 x 1 Inverted
Part ID 13547 · Light Bluish Gray
Qty 4
Slope Curved 2 x 1 Inverted
Part ID 24201 · Black
Qty 4
Slope Curved 4 x 1 Double with No Studs
Part ID 93273 · Black
Qty 4
Slope Curved 3 x 2 No Studs
Part ID 24309 · Black
Qty 2
Slope Curved 2 x 1 with Stud Notch Right
Part ID 29119 · Dark Bluish Gray
Qty 2
Slope Curved 2 x 1 with Stud Notch Left
Part ID 29120 · Dark Bluish Gray
Qty 2
Slope Curved 2 x 2 x 2/3 Inverted
Part ID 32803 · Black
Qty 2
Slope Curved 3 x 1 No Studs
Part ID 50950 · Black
Qty 2
Slope Curved 2 x 2 with Stud Notches
Part ID 66956 · Black
Qty 2
Plates Angled
Wedge Plate 2 x 2 Cut Corner
Part ID 26601 · Dark Bluish Gray
Qty 8
Wedge Plate 3 x 6 Cut Corners
Part ID 2419 · Dark Bluish Gray
Qty 2
Wedge Plate 2 x 2 Right
Part ID 24307 · Light Bluish Gray
Qty 2
Wedge Plate 3 x 3 Cut Corner
Part ID 2450 · Dark Bluish Gray
Qty 2
Wedge Plate 2 x 2 Cut Corner
Part ID 26601 · Black
Qty 2
Wedge Plate 2 x 2 Left
Part ID 24299 · Light Bluish Gray
Qty 1
Wedge Plate 2 x 2 Right
Part ID 24307 · Medium Nougat
Qty 1
Energy Effects
Wave / Flame Rounded with Base Rim
Part ID 6126b · Trans-Orange
Qty 6
Hinges, Arms and Turntables
Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]
Part ID 1927 · Black
Qty 4
Bricks
Brick 1 x 2
Part ID 3004 · Dark Bluish Gray
Qty 4
Brick 1 x 1
Part ID 3005 · Dark Bluish Gray
Qty 4
Brick 2 x 2 Corner
Part ID 2357 · White
Qty 2
Brick 2 x 3
Part ID 3002 · Dark Bluish Gray
Qty 2
Brick 1 x 1
Part ID 3005 · Trans-Orange
Qty 2
Brick 1 x 6
Part ID 3009 · Dark Bluish Gray
Qty 2
Brick 1 x 3
Part ID 3622 · Dark Bluish Gray
Qty 2
Brick 1 x 12
Part ID 6112 · Dark Bluish Gray
Qty 2
Technic Bricks
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
Part ID 32064a · Black
Qty 4
Technic Brick 1 x 2 [1 Pin Hole]
Part ID 3700 · Black
Qty 2
Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate
Part ID 73109 · Black
Qty 2
Technic Brick 1 x 1 with Axle Hole
Part ID 73230 · Medium Nougat
Qty 2
Large Buildable Figures
Large Figure Shoulder Cover, Armor, Round, Smooth with Bar
Part ID 1686 · Black
Qty 2
Bars, Ladders and Fences
Bar Holder with Hole and Bar Handle
Part ID 23443 · Black
Qty 2
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]
Part ID 3484 · Black
Qty 2
Bar, Angled with 1 x 1 Round Plate / Stud on End
Part ID 65578 · Black
Qty 2
Bar Holder with Clip
Part ID 11090 · Black
Qty 1
Bricks Wedged
Wedge 3 x 3 Facet
Part ID 2462 · Dark Bluish Gray
Qty 2
Wedge Curved 1 x 2 x 2/3 No Studs, Wing End
Part ID 47458 · Black
Qty 2
Technic Bushes
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
Part ID 32123b · Light Bluish Gray
Qty 2
Technic Special
Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side]
Part ID 48171 · Black
Qty 2
Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball
Part ID 57909b · Black
Qty 2
Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole, No Arm Holes
Part ID 67696 · Black
Qty 2
Technic Brick Special 2 x 2 with 10.2mm Balls with Holes and Axle Hole
Part ID 17114 · Dark Bluish Gray
Qty 1
Windows and Doors
Window 1 x 2 x 2 Flat Front
Part ID 60592 · Light Bluish Gray
Qty 2
Minifig Shields, Weapons, & Tools
Weapon Bladed Claw Spread
Part ID 10187 · Orange
Qty 1
Tubes and Hoses
Zipline, 22L with 2 Connectors - Flexible
Part ID 27965 · Orange
Qty 1
Retailer reviews
Summarized retailer review data when available.
Excellent kit! Fun time building and lighting it! I can see a great deal of time went into designing it. App not working so I can register my points.
First off let me say that I think this set is getting a bit too much criticism and is an overall fantastic build. The whole time I was building this set I was thinking how satisfying it was to construct the symmetrical “book binding” with the flame inside. People have said this could be a full set instead of a book nook and lacks the “finished” feel with the openings on either side. I personally disagree. I think these elements, along with the finished Balrog make for a wonderful representation of this scene and the Balrogs impact. It takes up about 80% of the space closed and the out folded wings when open is such a delight to see. Anymore detail or pieces and I think it would take away from the magic of this build, and for me, the scene itself that represents the movie and book. I like to think of the opening on either side as us viewers peering onto the beginning of this epic battle and setting the tone for this scene. Again, this is not the universally agreed upon opinion for this set, but it tickled my LOTR fancy and I’m very pleased with this build. And the ability to take the Balrog out so easily is why I rated the playability a 5. It’s a completely adjustable action figure that can be placed in numerous positions for many different additional scenes. To close yes this isn’t the most affordable, as we’re seeing these days with Lego, for what you get. The price tag does not translate I think and I believe it should be closer to the Harry Potter book nook price tag. The price indicates “You Shall Not Pass” 💀 All that to say, a fun build and if you are a LOTR fan I’d say worth adding to your collection.
A great bookend with Gandalf and Balrog on the bridge of Khazad-dûm. The pillars have the characteristic dwarf building style, and the movable Balrog figure is wonderfully depicted. Building it can sometimes feel a bit repetitive because you need to use a lot of the same pieces for the supports, but it's perfectly fine given the size. I would recommend buying a light kit here. I have one where the Balrog's whip is completely illuminated and the flames in his neck/back flicker, which makes the scene look so realistic.
I loved the building experience with this one!! It brought me back memories when I was younger watching that movie scene in 2001!! Fantastic
My husband built this and loved it. He said it was an easy build and was a lot of fun. He displays it in his office and said he might get the books to go with it. You can move it easily which is nice!
This was my first Lego set that I put together as an adult, and the main reason I purchased it was that it was the cheapest Lord of the Rings themed set I could get my hands on. I had been wanting to get one of the more expensive sets for a while now, but I couldn’t justify the price, especially considering I am new to the Lego building scene. The set was fun to put together, and I’m happy that I have a giant Balrog now as part of my first set. But I’m going to go along with the other reviews on the set and say that the value for the money is pretty awful. When I was buying the set, I almost picked up the Vikings village instead of this simply because it had double the pieces and was a few dollars cheaper at the store I was at. Additionally, I was missing two pieces that were rather small and didn’t make a huge change in how the build looks, but it is a quality control issue that I’m concerned about, especially if you’re spending this much money for a set. On the top of the Balrog skull, there are two angled pieces, and I was missing number 618-1720, which goes on the right top of the Balrog skull. I was also missing piece number 642-4674, which was part of the frame. Instead, I had to use piece number 455-8953 and could only place one 450-4378 angled pieces instead of two. I plan on buying another Lord of the Rings set in the future, but probably not anytime soon. I’m a pretty busy individual and wanted to have an introductory experience to a set. I don’t consider myself someone who would become a professional builder at all—just a casual. I hope that sets can come out in the future that are more reasonable in price, but my understanding is that most of the LOTR rings fan base nowadays are all adults who are more likely able to afford the expensive sets and licensing fees likely jack up the price.
A very nice set if you are a fan of LOTR. It is fun to build.
This Lord of the Rings: Balrog Book Nook Lego bricks set is huge. I think it is a great set to gift for fans of the books and movies. I think that the idea to make the build transform into a book nook is very cool and something I have never see before. My family and I had a lot of fun building this together. There are a lot of small pieces so be careful not to leave this where little hands and mouths can reach. My only issue is that when you close the Lego the bottom hinges detach. Otherwise it looks very cool.
Fun to build.
The instructions are clear and easy to follow, and the packaging is beautiful in the black elegant box. The structural design feels solid, and the bricks are the high-quality plastic you'd expect from LEGO. The overall LEGO experience is definitely great. The columns are designed with geometry and are very versatile. The color gradient is effective in creating the illusion of fire. The Balrog is very intimidating with its size compared to Gandalf. It is an improved design vs in the video game. I LOVE the flames in the background. They do have a distinct look, & its very nice.. It does not interfere with Balrog's wings when the nook closes. Love the set and I can't wait to see the next design. Thank you so much.
This is the coolest Lego set I’ve built! I was not missing any parts but ended up having a few extras with almost every bag. The guide is very detailed and helpful, we definitely would not have been able to build anything without it. The balrog itself seems kinda flimsy and the feet do not clip on to anything which I felt was kind of a bummer for stability purposes especially if you decide to actually use it for a book nook. I personally will be using it as decoration in fear that something may break. When you close it into its smaller form, the left side does not want to sit flush and clip in anyways. However, It could just be something faulty with the Legos in that specific pack. I would definitely buy something like this in the future. The theme really added to the fun.
I recently received LEGO The Lord of the Rings Balrog Book Nook and I absolutely love it.. it was a blast to build and it is a very sturdy build as expected from Lego. Yet another excellent quality product and my new favorite.
Great build for any LEGO and LOTR fan. Has a lot of smaller pieces that form these interesting mechanisms to let the wings fold up. The instruction booklet has fun facts related to the set inside and quotes from the books to enjoy while you build. The bags are easily labeled so if you don’t want to marathon build you can space it out in smaller sessions easily.
I have been a fan of Lord of the Rings for almost 50 years. This is my first Lego kit in the theme and it was a lot of fun to build.
I bought both this set and the Sherlock Holmes set. They cost the same, yet their value couldn’t be more different. This set is a mech set with a bad frame, while the Holmes set is a storybook! The Balrog itself is decent, but this is what you are essentially paying for. The frame itself is superfluous. The flames are cheap looking and flimsy. There was every chance to enclose it all with a proper book cover. With it open there could have been inside the mountain. It’s unfinished. Meanwhile the Holm s set has hidden rooms and moving pieces. It look great open and closed. I feel cheated by this set in comparison.
This set is absolutely epic and the balrog looks amazing, but the fold out part falls apart almost every time you are using it so just be wary of that. I definitely believe this set is great and adds some very nice decor to my bookshelf…but I’ve had $70-$80 sets with a way higher build quality
This welcome addition is a compact and detailed tribute to the iconic Gandalf vs. Balrog scene from The Lord of the Rings. It captures the fiery drama of Moria in a foldable bookend-style diorama. Great for display on a bookshelf, it includes a dynamic Balrog build, a Gandalf minifigure, and clever design elements—although some details are lost in lower light. A must-have for Tolkien fans and adult collectors.
I was excited to buy this set because it’s the first time since reviving the LotR theme a set came out that isn’t so big you need a new piece of furniture to display and so expensive you need a bank loan to purchase. Hopefully now Lego will produce a Chronicles of Narnia set/theme to go with Hogwarts and Moria.
This set appears to have been developed using a sort of minimalistic approach and in that regard, the build is fairly well executed. My biggest issue is the price point and that this build would have been far better as a diorama set. This is an iconic scene and it gets crammed into a 1200 piece book nook set? The Balrog itself is wonderful for what it is, but the overall set isn’t remotely close to a $130 build. With Lego reusing the Gandalf minifig and the fell beast wings, it would have been acceptable to be in the $80-$90 range. I would much rather pay more for a scaled up quality set with updated minifigs than have something like this just so Lego can have a cheaper set available. Having purchased and built all the previous LOTR sets, this one is probably the most disappointing in the way of value. While the shire build was also lopsided value wise, at least the build was fun and it mostly looks great. Long story short, if $130 is at your max price point and you want a cool balrog, go ahead and get it if you are a big time LOTR fan. However, it goes without saying that Barad Dur and Rivendell are far superior buys even if they are significantly more expensive (because they are worth every penny). I would save up for either of those builds and wait till this one goes on sale. One final word that has more to do with Lego’s QC- in addition to multiple missing pieces across other LOTR sets, this set was also missing approximately 6-7 pieces amongst the 9 bags. Fortunately, I have an extensive Lego collection and spare pieces. Luckily, they weren’t specific pieces to this set, but for this outrageous price, you’d expect all the pieces to be there.
As a massive Lord of the rings fan who is not able to afford the other Lord of the rings sets I was overjoyed to see a more affordable set being released of one of the most iconic scenes in the trilogy. I pre ordered this set day 1 and I am throughly pleased with it. The build quality great, it is a fun build and I love the techniques used to build up the rocks and pillars of the nook, it is also well engineered to fit the Blarog and stays in place very well. The Balrog is very dramatic looking and is almost perfect, I do not like the prominent gray piece used for the Balrogs chest and the tail leaves something to be desired however, the Balrog has great possibility and the mechanism for the wings is great. Gandalf is a good minigigure and is the only Lotr figure I have so I am very pleased with him. Overall, the set looks very effective when in either of the display options and the fire effect looks far better in person than on the pictures. Overall I would recommend as it is a great display piece and is a cheaper way to get a Lotr set which is not a brickhead and I hope Lego makes more in the future.
All retailer prices
Current prices, stock and discounts per retailer.
Price context
Lowest, highest and average price for this set.
This context is based on 2426 price points across 18 retailers. The chart on the page remains the full interactive source.
Price forecast
Conservative baseline for the next period.
The signal is mixed. Small movements are more likely than a large drop.
FAQ & set details
Pieces, year, RRP and retailer coverage.
Quick answers about price, stock and set data.